DO NOT place the main unit or thermometer in the dishwasher or immerse in liquid. The cooking pot, silicone ring, 2-Tier Reversible Rack, Cook & Crisp™ Basket and detachable diffuser can be washed in the dishwasher.NEVER immerse the lid in water or any other liquid. If using mild cleaners, ALWAYS wipe down after with wet cloth or paper towel. Wipe it down with a wet cloth or paper towel. ALWAYS allow the lid to completely cool down before cleaning.NEVER put the cooker base, digital cooking probe or probe cap (if included) in the dishwasher or immerse it in water or any other liquid. To clean the cooker base and control panel, wipe them with a damp cloth.Unplug the unit from the electrical socket before cleaning.The lid will remain locked until the float valve has fully dropped.įollow these steps to clean the unit thoroughly after every use: When natural pressure release is complete, the float valve will drop down and you will be able to open the lid.
Press the KEEP WARM button if you would like to turn Keep Warm mode off. During this time, the unit will switch to Keep Warm mode. This can take up to 20 minutes or more, depending on the amount of liquid and food in the pot.
When pressure release is complete, the float valve will drop down and you will be able to open the lid. Steam release will be accompanied by an audible hiss. Be careful and do not place your hand over the vent as it releases steam. When pressure cooking is complete and the KEEP WARM light comes on, turn the pressure release valve to the VENT position to release the steam. Quick Pressure Release: Use ONLY if your recipe calls for it.Once your silicone ring is properly installed, try pressure cooking again.
#Ninja foodi ferment mode free
Ensure the silicone ring is clean and free of damage and then carefully reinstall the silicone ring into the unit's lid using the instructions listed in the instruction booklet. Please use the Ninja Foodi SmartLid silicone ring designed for this unit. NOTE: The silicone ring is designed specifically for the Ninja® Foodi® SmartLid and the unit will only be able to build pressure safely when the original silicone ring is installed correctly. After use, remove any food debris from the silicone ring and anti-clog cap. If the silicone ring is not installed properly the unit will not pressurise. We recommend to try pressure cooking again.
#Ninja foodi ferment mode install
The last section of the silicone ring is easiest to install when in between two of the metal pins. Start with one section and work in both clockwise and anti-clockwise directions until gently working the last section of the silicone ring under the rack. To reinstall, carefully insert the silicone ring under the rack. To reinstall, gently work the silicone ring into the rack section by section, ensuring the metal ring rack is visible.
The ring can be installed with either side facing up. To remove the silicone ring gently, pull it outward, section by section, from the metal ring rack.
0 kommentar(er)
